All Welded Locker
Tiers Available for this Product
What We Do?
We Do Reliability and Quality.
■ 2 mil thick powder coat baked to cure finish
■ All doors come standard with recessed handles for added safety and security
■ Standard 16 gauge continuous piano type hinges riveted to both door and frame
■ Continuous door strike has rubber bumpers to reduce noise
■ Standard 14 gauge door with reinforcement hat channel/door stiffener
■ Standard 16 gauge bottom
■ Heavy duty gauges
■ Ships Fully Assembled
■ Lifetime Warranty * Best-in-class
DOOR FRAME: 16
■ Diamond Perforations (Standard)
■ Standard Louvers
■ Mini Louvers
■ Rectangular Perforations
■ Recessed Handle Multi Point Latch
■ Recessed Handle Single Point Latch
■ Door Pull (Standard for Box Lockers)
PRODUCT FABRICATION INFORMATION
Material: Steel parts shall be mild cold rolled commercial quality steel, capable of taking a high grade enamel finish. Steel mandrel rivets, zinc plated truss, and fin head bolts with hex nuts.
Fabrication: Shall be on the unit principle, each locker with individual door and frame, individual top, bottom, back, and shelves, with common intermediate divisions separating compartments.
Construction: Pre-assemble lockers by welding into one piece structures in groupings most practical for job requirements, welds free of burrs; max width of groups to be 54”.
Door Frames: Shall be 16 gauge formed in a channel shape with continuous vertical door strike
Doors: 14 gauge steel formations are full channel shape on the lock side adequate depth to fully conceal the lock bar, channel formation on the hinge side, and right angle formations across the top and bottom.
Ventilation: All sides and doors 20” or higher shall be perforated with diamond shaped perforations. Optional solid doors and sides.
Body: Steel specially formed for added strength and rigidity and to ensure tight joints at fastening points.
Box Lockers: Door shall be 14 gauge steel, punched for built in lock or pad lock. Equip doors for use with padlocks with an 18 gauge combination door pull, staple, and lock hole cover plate with integral friction.
Hinges: Shall be 16 gauge full length continuous piano type riveted to both door and frame. Hinge shall maximize security and enhance resistance to abuse and vandalism.
Handle & Latching: Handles shall be recessed in the door and be finger lift control. Drawn pocket shall be 20 gauge brushed stainless steel securely fastened to the door with two tabs plus a positive tamper resistant decorative fastener. The pocket shall be of sufficient depth to prevent a combination padlock, built in combination lock or key lock from protruding beyond the face of the door.
Interior Equipment: Full width shelf, coat rod, and two single prong hooks
Number Plates: Provide holes for attaching number plates. Each locker shall have a polished aluminum number plate riveted to door face with black numerals 1/2” high.
Finish: All components shall have a 2mm hybrid epoxy/polyester powder, electrostatically applied to ensure a uniform finished and baked to cure.
Submittals: Submit under provisions of Section 01 33 00. Shop Drawings shall show dimensioned plans, elevations, and sections.
Accessories: available upon request.
Locks: available upon request.
ADA Compliance: Lockers are to meet the Americans with Disabilities Act accessibility guidelines. They shall have recessed handles and shall be single tier or lower opening of a double tier locker. Locker bottom shall be a minimum of 15” off the floor. Single tier lockers shall have a shelf 48” off the floor. Doors assigned for handicapped use shall have an appropriate symbol sign.
Click here for more ADA information.
Options: Customizable metal base.
Installation: Lockers shall be installed in compliance with Lockers Manufacturing’s installation instructions and shall be level and plumb with flush surfaces and rigid attachment to anchoring surfaces.
Assembly: Assembly by bolting is acceptable, Lockers Manufacturing recommends assembly by riveting. Rivets provide solid permanent fastening but allow for faster removal by drilling where future rearrangement of lockers or replacement of damaged parts may be required.
Anchoring: Anchor lockers to floor and wall
Adjust and Clean: Adjust doors and latches to operate without binding. Verify that latches are operating satisfactorily. Adjust built-in locks to prevent binding of dial or key and ensure smooth operation prior to substantial completion.
Touch up: With factory supplied paint and repair or replace damaged products before substantial completion.
Protection: Protect installed products until completion of the project.
Delivery, Storage and Handling: Store product in manufacturers unopened packaging until ready for installation to protect the locker finish and adjacent surfaces from damage.
LockersMFG presents this All-Welded locker in two-tone blue. The body is Sapphire Blue RAL 5003 and the door is Traffic Blue RAL 5017. The All-Welded locker series from LockersMFG is perfect for users needing a durable long lasting locker. The door and hinge are 14 gauge steel. The rest of the locker is 16 gauge. The result is a tough, long lasting locker. LockersMFG has all the optional accessories needed to provide a clean professional installation. Additionally, we can customize this locker to fit your exact needs.