Options Available for Open Front Lockers
What We do?
We do reliability and quality .
Open Front Lockers are the perfect fit for athletic team rooms, police, firefighter and first responders’ facilities, or any other application where easy access to uniforms and equipment are needed. These lockers can be configured to comply with your specific needs, and are available in 24 colors as well as any custom color.
LockersMFG Open Front Lockers are available in both All-Welded and Knock Down construction. LockersMFG Lifetime Warranty still backs either version.
The Open Front door frame is 16 gauge steel formed in a channel shape. The perforated diamond sides create full ventilation while giving each a personal space. Fully equipped Open Front lockers come with a security box fastened to a full-width shelf and a footlocker with a hinged, reinforced seat, both lockable to secure personal items. The front of the footlocker is recessed for an external padlock and saves floor space by eliminating the nuisance of open locker doors and the need of locker room benches.
■ 2 mil thick powder coat baked to cure finish
■ Rubber bumpers mounted to contact points for quieter operation
■ Door frame is spot welded construction
■ Knocked Down or All Welded Construction
■ Open front style
■ Standard option has a full width shelf, 2 coat hooks and a coat rod
■ 16”, 24” and 33” wide models
■ Lifetime Warranty * Best-in-class
DOOR FRAME: 16
■ Sides – Diamond Perforation (Standard), Solid (Optional)
■ Foot Locker – Mini Louvers (Standard), Solid (Optional)
■ Security Box – Solid (Standard), Standard Louvers (Optional)
■ Security Box - Door Pull
■ Footlocker - Pad Lock Hasp
PRODUCT FABRICATION INFORMATION
Material: Steel parts shall be mild cold‐rolled commercial quality steel, capable of taking a high grade enamel finish. Steel mandrel rivets, zinc plated truss, fin head bolts and hex nuts.
Construction: Pre assemble lockers by welding into one piece structures in groupings most practical for job requirements, welds free of burrs; max width of groups to be 54”; no bolts, nuts or rivets allowed in assembly of main locker groups.
Body: Steel specially formed for added strength and rigidity and to ensure tight joints at fastening points.
Construction: Lockers shall be built on a unit principal with common intermediate uprights separating units. Locker body assembly using rivets and/or nuts and bolts.
Body: Hole spacing in locker body construction: not exceeding 9”. Steel specially formed for added strength and rigidity and to ensure tight joint at fastening points
ALL WELDED & K.D.
Door Frames: Shall be 16 gauge formed in a channel shape.
Ventilation: Front panel to have a pattern of mini louvers, Security Box door solid with diamond perforated sides.
Interior Equipment: Full width shelf, coat rod, and two single prong hooks.
Box Lockers Security Box: Above Shelf. Door shall be 14 gauge steel, punched for built in lock or padlock. Lock hole cover with door pull shall be provided for padlock use. Hinges shall be 16 gauge continuous and riveted to 16 gauge welded frame
Foot Locker: With hinged bench seat, padlock hasp and stainless steel strike. Hinge 16 gauge continuous and riveted to horizontal panel.
Number Plates: Provide holes for attaching number plates. Each locker shall have a polished aluminum number plate riveted to door face with black numerals 1/2” high.
Finish: All components shall have a 2mm hybrid epoxy/polyester powder, electrostatically applied to ensure a uniform finished and baked to cure.
Submittals: Submit under provisions of Section 01 33 00. Shop Drawings shall show dimensioned plans, elevations, and sections.
Accessories: available upon request. Locks: available upon request.
ADA Compliance: Lockers are to meet the Americans with Disabilities Act accessibility guidelines. They shall have recessed handles and shall be single tier or lower opening of a double tier locker. Locker bottom shall be a minimum of 15” off the floor. Single tier lockers shall have a shelf 48” off the floor. Doors assigned for handicapped use shall have an appropriate symbol sign. Click here for more ADA information.
Installation: Lockers shall be installed in compliance with Lockers Manufacturing’s installation instructions and shall be level and plumb with flush surfaces and rigid attachment to anchoring surfaces.
Assembly: Assembly by bolting is acceptable, Lockers Manufacturing recommends assembly by riveting. Rivets provide solid permanent fastening but allow for faster removal by drilling where future rearrangement of lockers or replacement of damaged parts may be required.
Anchoring: Anchor lockers to floor and wall
Adjust and Clean: Adjust doors and latches to operate without binding. Verify that latches are operating satisfactorily. Adjust built-in locks to prevent binding of dial or key and ensure smooth operation prior to substantial completion.
Touch up: With factory supplied paint and repair or replace damaged products before substantial completion.
Protection: Protect installed products until completion of the project.
Delivery, Storage and Handling: Store product in manufacturers unopened packaging until ready for installation to protect the locker finish and adjacent surfaces from damage.
RECENT OPEN FRONT LOCKERS
All Welded Open Front
LockersMFG made this particular locker for a new high school athletic complex. We installed this locker for the football, baseball, soccer, and softball locker rooms. It is our standard Open Front All-Welded locker with a security box and shelf at the top and a lockable footlocker/seat at the bottom. This locker, made from the highest quality cold-rolled steel, will provide years of service. These lockers were custom powder coated in RAL 3005 Wine Red to match the school colors.Please note LockersMFG can customize this design to fit your specifications. The color, a full shelf up top, or even a door, LockersMFG can create a locker to meet your needs.
Knock Down Open Front Lockers
This is an example of an Open Front locker of Knock Down construction. This particular model features a lockable security box at the top, an open storage shelf, and a lockable footlocker/seat combination. Note our unique customizable seat cushions. Available in many vinyl colors with full-color printing of your school name, mascot, logo, motivational saying, etc. Your idea can be turned into a beautiful locker room addition for your team to enjoy. At the top of this durable black Knock Down Open Front locker is our stainless steel helmet and shoulder pad rack. This raised platform promotes ventilation and drying of shoulder pads and helmets. It keeps your lockers organized and uniform looking, a great addition for existing lockers as well.